|
Mask ROM (MROM) is a type of read-only memory (ROM) whose contents are programmed by the integrated circuit manufacturer (rather than by the user). The terminology "mask" comes from integrated circuit fabrication, where regions of the chip are masked off during the process of photolithography. It is common practice to use rewritable non-volatile memory – such as UV-EPROM or EEPROM – for the development phase of a project, and to switch to mask ROM when the code has been finalized. For example, Atmel microcontrollers come in both EEPROM and mask ROM formats. The main advantage of mask ROM is its cost. Per bit, mask ROM is more compact than any other kind of semiconductor memory. Since the cost of an integrated circuit strongly depends on its size, mask ROM is significantly cheaper than any other kind of semiconductor memory. However, the one-time masking cost is high and there is a long turn-around time from design to product phase. Design errors are costly: if an error in the data or code is found, the mask ROM is useless and must be replaced in order to change the code or data. Some integrated circuits contain only mask ROM. As of 2003, four companies produce most such mask ROM chips: Samsung Electronics, NEC Corporation, Oki Electric Industry, and Macronix.〔("Technology Analysis: Oki P2ROM to Replace Mask ROM, Flash EEPROM" ) by Motoyuki Oishi 2003〕 Other integrated circuits contain mask ROM as well as a variety of other devices. In particular, many microprocessors have mask ROM to store their microcode. Some microcontrollers have mask ROM to store the bootloader or all of their firmware. ==See also== *Field-programmability *Mask work 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Mask ROM」の詳細全文を読む スポンサード リンク
|